Cisco Certification - Itronix Solutions

Cisco Certification

CCNA Training Overview

We offer best CCNA Training in Chandigarh and Mohali with most experienced professionals. Our Instructors are working in CCNA and related technologies for more years in MNC’s. We aware of industry needs and we are offering CCNA Training  in more practical way. Our team of CCNA trainers offers CCNA in Classroom training,  and CCNA Corporate Training services. We framed our syllabus to match with the real world requirements for both beginner level to advanced level. Here are the major topics we cover under this CCNA course Syllabus Networking concepts, OSI – Model, TCP/IP Model & Ipv4 Addressing, Subnetting, Introduction to IPV6, Basic of Router & Configuration, Different modes of operation & basic commands. Every topic will be covered in mostly practical way with examples.

We are the best Training Institute offers certification oriented CCNA Training in Chandigarh and Mohali. Our participants will be eligible to clear all type of interviews at end of our sessions. We are building a team of CCNA trainers and participants for their future help and assistance in subject. Our training will be focused on assisting in placements as well. We have separate HR team professionals who will take care of all your interview needs.

 

CCNA Course Syllabus:-

Networking concepts

  • Components of network – router, switch, hub, bridge etc
  • Types of Network – LAN, MAN, WAN, VPN, PAN & Content Network
  • Defining Network requirements – NIC- Ethernet (CSMA/CD)
  • 10/100/1000 mbps DUPLEX (Half/Full/Auto) – Connecting Media – Coax.
  • 10 base 2T – UTP/STP – CAT 1/2/3..
  • Straight through/cross crimping (only details no practical)
  • Fiber optics – Single/Multimedia
  • 100 Base TX/FX etc – wireless communication.
  • Ethernet cabling Standard.
  • Connecting Devices
  • Repeater – Hub – Switch – Bridge – Topology – Bus/Star/Ring

OSI – Model

  • 7 Layers – Communication between the Layers (Encapsulation & De-encapsulation) – PDU.
  • Layer 2 – MAC/LLC – 802.3/802.2 (SAP/SNAP) /Ethernet II – Frames
  • Broadcast/Collision domain – point of -Hub/Switch/Router
  • L4 – 3way handshake – windowing – and about – Connectionless
  • Packet size [64B (mini) to 1518B (Max)]

TCP/IP Model & Ipv4 Addressing

  • All Layers of TCP/IP Compound with – OS
  • Application Layer – TFTP/FTP/SMTP/TELNET/SNMP/DNS
  • Transport Layer – TCP/UDP – TCP Segment Format
  • 3 way handshake/windowing – UDP segment Format
  • Internet Layer
  • IP datagram format – Protocol No. – TCP 6 – UDP 17
  • ICMP – ARP – RARP
  • Introduction to IP addressing – Class A/B/C/D/E
  • Private IP address – First OCTET range etc.

Subnetting

  • Default Subnet Mask
  • Class C Subnetting & Practice no. given
  • Class B Subnetting & problems
  • Class A Subnetting & problems

Introduction to IPV6

  • Introduction
  • Host Address Assignment
  • Unicast, Multicast and other Special ipV6 Addresses
  • Configuring ipV6 Routing and Routing Protocols
  • Translations between ipV4 and ipV6
  • Summary

Basic of Router & Configuration

  • Selection of Router & Cabling a Route
    • When Router used – LAN with WAN connect – to connect networks of different IP
    • Different interface of Router – AUI /S0/S1/AUX – console / BRI etc.
    • Cables used in different interfaces/purpose of interfaces
    • WAN interface cable – EIA/TIA – 232/449/530 – V.35 – X.21
    • Different CISCO series – modular/fixed – 10mbps/100 etc
    • Straight through between DTE & DCE

Different modes of operation & basic commands

  • Internal Components:
    • ROM – POST – BSL – ROM-MONITOR PRG – MINIIOS
    • Different interface of Router – AUI /S0/S1/AUX – console / BRI etc.
    • DRAM -Running Config
    • NVRAM – Startup Config
    • Flash MEM – IOS
  • Different Modes:
    • ROM Monitor – Reboot Mode – Setup – Exec Model
  • Exec Mode
    • User -Privilege – Global – Sub-configuration mode
    • Syntax/command to switch between modes
    • Assigning IP address for -E0-S0-S1
    • Enabling/disabling – console/privilege / vty password
    • Mold – command
    • Show Config / start / run / version / flash
  • Basic commands practice
    • Changing between modes – (user-privilege- Global-etc)
    • IP address configuration-E0-S0-S1
    • Password – enabling – encrypting it
    • Practice – motd – show commands – editing commands
    • Assigning host name (for Router)
  • Advanced Commands
    • Register value – X2102 – boot field value/purpose ROM monitor made – password breaking 8th/6th/13th bit of register value importance
    • Boot system flash/network/ROM – config-register (Changing register value) – etc command purpose Booting sequence – Backup & Recovery – CDP
    • Practice an above commands as well as following
    • Telnet – [ctrl+shift+6]x – disconnect – sh users /Sessions
    • Clear lines resume – [hostname resolving in telnet domain Enabling/disabling etc – no practical for this alone]
    • Overview of Cisco SDM (Security Device Manager)

IP Routing

  • IP Routing, Static Routing & Default Routing
    • IP routing – static routing – default- dynamic routing
    • Providing clock rate to up the link after identifying DCE by “Sh controllers” command
    • Commands/syntax – Static/default routing
  • Static Routing & Default Routing
    • Practical-session for Static & default routing
  • Dynamic Routing and RIP
    • Dynamic Routing – IGP & EGP
    • IGP – RIP-OSPF – EGRP – EIGRP
    • Classes of Routing Protocol – Distance vector – Link State – Balanced hybrid
    • Role of Routing Protocol – builds/updates/selects & Routes the packet
    • Soluting for Routing loops – Max. loop count – split horizon – Route poison Reverse – Hold down Timer
    • Features of RIP – distance vector algorithm – RIP V1/V2 – load sharing – metric (depends – loop count)
    • Metric value depends – loop count – Ticks – delay – Reliability – cost – MTU – Bandwidth
    • Command – Router RIP Network
    • Sh IP route
    • Timer value for RIP– Update/Invalid/ hold down/flush Timer
  • RIP
    • Dynamic Routing – RIP Practical
  • Dynamic Routing EIGRP & OSPF
    • Limitations of distance vector algorithm
    • Features of EIGRP and its operations
    • Configuring EIGRP – “Auto-redistribution”
    • Verify and troubleshooting EIGRP
    • Features of OSPF and its operation
    • Configuring single area OSPF
    • Verify and troubleshoot OSPF
  • Access List
    • Purpose/advantage of Access-list
    • IP [-for a host – for a network/sub network].
    • Std IP access-list – wild card calculation
    • Extd IP access list
    • Switch port ACL
    • Step involved in creating access list
    • Applying access list at the interface – (inbound/outbound)
    • Named access-list for IP
    • Access-list in Telnet sessiont
  • IP standard Access List
    • Practical on
    • IP Std access-list
  • IP Extended Access List
    • IP Extd access-list, named access lists
  • NAT
    • Implement, Verify & Troubleshoot NAT
      • Explain the Basic Operation Of NAT
      • Using (including CLI/SDM)
      • Practicals on Static NAT, Dynamic NAT and PAT
      • Troubleshoot NAT issues
  • WAN Technologies
    • WAN Technologies- Leased Line
      • Leased line
      • P to P communication
      • HDLC & PPP protocol-features
      • Enabling HDLC & PPP
    • PPP Link
      • PPP layer & its explanation/role
      • PAP/CHAP role
      • Configuring PAP/CHAP using commands
    • VPN
      • Describe VPN technology
      • Importance Of VPN
      • Benefits & Role
      • Impact & Components
    • Frame-Relay
      • Packet Switched Network
      • Virtual circuit – DLCI – Access-link – CRI – FECN – BECN – LMI
      • Enabling Frame-relay
      • Inverse ARP
      • Configuring frame-relay for
      • Mesh Network
      • Star Network
      • Combination of above two
  • Switching
    • Switching Operation and Configuration
      • Function –add-learning / Forward-filters the Frame / loop avoidance
      • Redundant path and its problems
      • Spanning Tree Protocol – purpose – its different state (blocking/listening/learning/forwarding)
      • Modes of operation of switch/Bridge
      • Port duplexing
      • Switch & hub – half duplex
      • Switch & Server – full duplex
      • CISCO catalyst switch 1912 & 1924 interface details
      • M/K/I modes
      • Basic and advanced commands
      • Enabling & configuring MAC address table
    • VLAN Configuration
      • VLAN – ISL – Trunking
      • Enabling Trunking
      • Assigning VLAN No. & name
      • Configuring ports to a specific VLAN
      • VTP purpose
      • VTP domain
      • VTP modes of operation
      • Switching Technologies (including VTP , RSTP , PVSTP, 802.1q)
      • Implement Basic Switch Security (including Port Security , Trunk access .etc )
  • Wireless LAN
    • Wireless Intro & Operation
      • Standards associated with Wireless Media (including WI-FI Alliance, ITU/FCC)
      • Ad-hoc mode, infrastructure mode
      • SSID, BSS, ESS
      • Basic Parameters to configure on a Wireless Network
      • Wireless Security Feature’s (WEP, WPA 1 / 2 )
      • Implementing Wireless Networks